Use: Trailer Areas
Areas: Trailer Suspension
OE NO.: ZYXG
Max Payload: 25T*three
Dimension: STHangZhouRD
Automobile Product: Weighty obligation semi trailer truck
Kind: Axle Suspension, Suspension Spring
Parts: Hanger, Equalizer, Leaf Spring, Radius Rod Assembly
Placement: Front Rear axle suspension
Substance: Steel
Hanger content: Q235
hanger thickness: 6/8/10mm
king pin: fifty/60/70mm
wheelbase: 1310/1360mm
leaf spring width: 90mm/100mm
Packaging Details: Wood pallets 30/60set in 1*20FCL
Port: HangZhou

Suspension design	H(mm )	A1(mm)	B1(mm )	A2(mm )	B2(mm )	A3(mm )	B3(mm )	Carrying ability
ZY13AZ3-eleven	a hundred and ten	399	369	390	360	381	351	13000*3
ZY13AZ3-thirteen	130	419	389	410	380	401	371	13000*three
ZY13AZ3-fifteen	a hundred and fifty	439	409	430	four hundred	421	391	13000*three
ZY13AZ3-eighteen	180	469	439	460	430	451	421	13000*3
ZY13AZ3-21	210	499	469	490	460	481	451	13000*three
ZY13AZ3-23	230	519	489	510	480	501	471	13000*three
ZY13AZ3-twenty five	250	539	509	530	500	521	491	13000*three
ZY13AZ3-27	270	559	529	550	520	541	511	13000*3
ZY13AZ3-thirty	300	589	559	580	550	571	541	13000*three
ZY13AZ3-32	320	609	579	600	570	591	561	13000*three
ZY13AZ3-35	350	639	609	630	600	621	591	13000*3

Suspension design	H(mm )	A1(mm)	B1(mm )	A2(mm )	B2(mm )	Carrying potential
ZY13C2-23	230	188	158	179	149	13000*2
ZY13C2-twenty five	250	208	178	199	169	13000*two
ZY13C2-30	300	508	228	249	219	13000*2
ZY13C2-32	320	278	248	269	239	13000*two

Suspension product	H(mm )	A1(mm)	B1(mm )	A2(mm )	B2(mm )	Carrying ability
ZY13B2-eleven	110	four hundred	370	391	361	13000*two
ZY13B2-13	one hundred thirty	420	390	411	381	13000*2
ZY13B2-15	150	440	410	431	401	13000*2
ZY13B2-eighteen	a hundred and eighty	470	440	461	431	13000*two
ZY13B2-21	210	490	470	491	461	13000*two
ZY13B2-23	230	510	490	511	481	13000*two
ZY13B2-25	250	530	510	531	501	13000*2
ZY13B2-27	270	560	530	551	521	13000*two
ZY13B2-30	three hundred	580	560	581	551	13000*2
ZY13B2-32	320	610	580	601	571	13000*two
ZY13B2-35	350	640	610	631	601	13000*2

Merchandise show1. American suspension successfully lowers the significant vibration during motor vehicle operation and ensures the greatest braking functionality of the vehicle.
2.Easy procedure to defense of various products from the affect of car procedure.

3.American suspension makes the car adapt to the highway condition faster and far better.

four.When the vehicle is managing at no load, the axle is lifted by the axle lifting system to decrease tire put on.
5.American suspension lifting gadget can raise or reduced the top of the vehicle for simple unloading.

Packaging & Needle Roller Bearing Substantial Quality HK121708 HK121710.5 HK141908 HK152007 HK1610 Needle Roller Bearing for Gearbox Delivery
Company Info Positioned in Xihu (West Lake) Dis. Industrial Zone, ZHangZhou was evaluated as the National Higher-Tech Organization In 2014, and our trademark was rated as ZheJiang Well-known Model. We have constructed an engineering technology study center for transportation car suspension method of HangZhouCity. Our organization has 12 things of National patent technology, and undertook a amount of provincial and municipal initiatives, A amount of our goods ended up rated as municipal and county science and technology progress award. In March 2016, as the sponsor, Substantial Quality Maker Value Offroad Ball Joint Rod Finishes Bearings ZHangZhou united 27 enterprises with ZheJiang College of Science and Technological innovation, ZheJiang University of Technological innovation, ZheJiang Jiaotong University and other 5 universities, to set up a mental home defense alliance for specific car industry in ZheJiang province , actively playing a excellent position in ZheJiang unique car market to promote scientific and technological innovation, intellectual house defense. There are more than one hundred sets range of creation and processing equipments in our firm, Cylindrical Roller Bearing N NU NJ NF NUP NFP 319 320 ECP ECJ E EM C3 including suspension automated welding program which save human source and boost production efficiency, even though substantially enhance items top quality. ZHangZhou has passed ISO9001, ISO140001, OHSAS18001 administration technique certification and the standardization of intellectual property administration certification. We have built-in tests equipments in a tests heart, with innovative screening approaches, we can control every single website link from raw materials, China Manufacturing unit driving rear axle with transmission trike rear axle Electrical motor rear axle semi-concluded goods to completed items, to ensure that our clients can get constant top quality items.

An Axle is a Simple Machine For Amplifying Force

An axle is the central shaft that connects the drive wheels of a vehicle. It transmits power from the engine to the wheels and absorbs braking and acceleration forces. It may also contain bearings. Learn more about the important functions of the axle in your vehicle. Its simple design makes it an efficient machine for amplifying force.

An axle is a rod or shaft that connects to the drive wheels

An axle is a rod or shaft that is fixed to the drive wheels of a vehicle. It provides support and rotates with the wheels. Generally, a vehicle has two axles. However, larger vehicles can have more. The type of axle used will depend on how much torque and speed the wheels need to travel.
Drive axles are crucial to the operation of a car. They transfer power from the engine to the wheels, so they must be strong and durable. They also need to be able to support the weight of the vehicle and resist accelerated forces. The drive axle is usually connected to a driveshaft, which extends upward into the transmission and connects with the engine.
There are two main types of axles: front wheel drive (FWD) and rear wheel drive (RWD). The former type is common in passenger vehicles, while the latter type is more common for trucks and cars. The rear wheel drive (RWD) axle connects to the drive wheels, while the front-wheel drive (FWD) axle transfers power from the transaxle differential to the wheels.
Modern drive axles consist of short rods with a flexible rubber boot covering the CV joint. The rubber boot helps to prevent dirt and grease from getting into the CV joint. The increased complexity of the drive axle increases the risk that something goes wrong with it. However, this increases the car’s traction, ride quality, and handling.
A car’s axles are designed by engineers to be extremely strong. They must be able to withstand thousands of pounds of weight, while operating under high levels of friction. But no drive axle is invincible; they will break if the vehicle is overloaded or too heavy.
The rear axle is connected to the engine and rotates with the wheels. The front axle helps with steering and absorbs road shocks. Typically, this part is made of carbon steel and nickel steel.

It absorbs braking and acceleration forces

The Axle is an important part of a vehicle’s suspension. It is responsible for absorbing braking and acceleration forces. Axle roll centres are located on the transversal vertical plane, through the center of each wheel. This is the point at which lateral force applied to the sprung mass is transferred to the unsprung mass, a process known as transfer of momentum. This force coupling point is also known as the Neutral Roll Axis.
An axle’s role in a vehicle goes beyond absorbing braking and acceleration forces. It also serves as a weight transfer device, reducing the stress on the joints of a vehicle. Its design has evolved over time to meet a variety of requirements. It must be durable and able to absorb braking and acceleration forces, while providing the right amount of structural support.
A potential diagram can be used to benchmark tyre performance. The data entered can include suspension geometry and load distributions. The lateral force potential of a tyre is calculated for each individual tyre in an axle, and the values obtained for a constant steer angle are also included.
Optimal energy recovery is crucial for absorbing braking forces and meeting the total braking force required for a given deceleration. Figure 11 shows the braking forces for the front and rear axles over a certain range when j/g = m. The thick solid line ab represents this range.
In addition to braking and acceleration forces, an axle’s lateral force capacity is limited by lateral load transfer. If one axle fails to absorb lateral forces, it might break loose and skid before the other. This can lead to understeer and oversteer. This is why it is not a good idea to put unsprung weight on a vehicle’s axle.

It transmits power from the engine to the wheels

The axle is an integral part of a vehicle’s drive system. It transmits power from the engine to the wheels. Different types of axles have different roles in transmission of power from the engine to the wheels. The drive shaft is the main component of an axle, connecting the engine and the wheels.
A vehicle’s axle transmits power from the engine to the rear wheels. The power is transferred through the gears to move the car forward. The inner wheel of a bicycle pedal powers the back wheel, while the outer wheel moves at a different speed. Similarly, the power from the engine is transmitted to the wheels by a car’s crankshaft and driveshaft.
The type of axle you choose depends on the size of the vehicle and its purpose. Standard axles are suitable for most vehicles, while customized axles are best suited for high-performance vehicles. Customized axles give you more control over the wheel speed and torque. It’s important to know about the types and sizes of axles to choose the right one for your vehicle.
A differential is another vital component of the drivetrain. It allows the power from the engine to reach both wheels, which allows the vehicle to accelerate and decelerate. A differential also compensates for the difference in tyre speeds on curved roads. By using a differential, you can increase the speed of the wheels and improve your car’s handling.
The differential between the front and rear axles is called a bevel ring gear. Its input shaft is supported by a ball race mounted in the axle casing. The other part of the differential is called the input helical gear. The two sun gears are connected by cross-pins.

It is a simple machine for amplifying force

A simple machine is one that increases the output of force without altering the input force. For example, a lever increases force but does not create new energy. Therefore, it is necessary to balance the work input and output. It is important to keep in mind that friction can reduce energy.
Using a simple machine, you can perform various tasks. For example, you can use it to cut and pry apart objects. This type of machine involves a wheel and an axle, which have a smaller radius than the wedge. The force applied by the wheel pushes the two pieces apart.
Another simple machine that amplifies force is a gearbox. The earliest gearboxes were used to lift buckets or weights from wells. The large gear is attached to a smaller one by a hinge. The smaller gear increases the force of the larger one, allowing the small gear to lift much larger loads.
A wheel and axle is a simple machine that uses mechanical advantage to change force. A wheel is a circular disk, and an axle is a rod through the center. The mechanical advantage is a result of the combination of torque and angular momentum to work against the force of gravity. In addition, this machine is closely related to gears.
Simple machines are a great way to compare the magnitude of forces, as they use similar mechanisms. One of the oldest examples of a simple machine is a wheel and axle. A wheel is fixed to an axle, and the axle is fixed to a vertical surface. The force generated by the wheel will be proportional to the distance between the two spools.
Another simple machine that amplifies force is a lever. A lever uses a beam or a rigid rod that can pivot on its fulcrum. It is an effective tool for shifting heavy loads, and also for applying force. It also reduces the friction of a vehicle while preserving its momentum.

editor by czh 2023-03-16