Product Description
Square trailer axle beam measures 57-1/2″ from hub face to hub face (when hubs – sold separately – are mounted) and 46-1/2″ from spring center to spring center. Corrosion-resistant galvanized steel is great for a boat or snowmobile trailer.
Features:
- Square axle beam acts as part of your trailer’s suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- Galvanized steel construction is sturdy and provides corrosion resistance
- Great for boat or snowmobile trailers
- Reversible straight beam can be used for underslung or overslung applications
- Seatless design – does not require spring seats
- EZ-lube straight spindles – no drop
- Built-in grease zerks for simple lubrication
- 2 Spindle nuts, 2 spindle washers, and 2 cotter pins included
Specs:
- Weight capacity: 1,800 lbs
- Hub-face-to-hub-face length: 57-1/2″
- Spring-centering-hole-to-spring-centering-hole length: 46-1/2″
- Overall length: 62″
- Tubing width: 1-1/2″
- Spindle size: 1-1/16″
Bearing, Race, and Seal Information
- Bearings (sold separately)
- Inner/outer bearing: L44649
- Races (sold separately)
- Inner/outer race: L44610
- Grease seal (sold separately): RG06-571
- Inner diameter: 1.5″
- Outer diameter: 1.987″
Galvanized Steel
Galvanized steel parts are great for marine use because they are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding, making them a good choice for boat and snowmobile trailers.
| PN | Axle Type | Rating | Hub Face to Hub Face | Spring Center To Spring Center | Tubing width | Overall length | Spindle size |
| TAB015 | CE Smith Trailer Axle Beam | 1,800 lbs. | 57-1/2″ | 46-1/2″ | 1-1/2″ | 62″ | 1-1/16″ |
SELECTING THE PROPER TRAILER AXLE
When selecting an axle for your application remember to consider the following important specifications:
-
LOAD CAPACITY: the load rating of the axle must support the maximum gross vehicle weight rating. For multiple axle trailers divide the GVWR by the number of axles to determine the minimum load capacity of each axle.
-
TRACK LENGTH: measure your axle track length by determining the distance between the center of 1 tire to the center of the other tire. A more precise measurement can be made by measuring the distance from 1 ‘HUB FACE’ to the other. The hub face is also known as the mounting surface where the wheel studs are located.
-
SPRING CENTERS: measure the distance from the center of 1 spring to the center of the other.
NOTE: not required for replacement torsion axles -
OVERALL LENGTH: measure the distance from the very end of an axle’s spindle to the very end of the opposite spindle.
-
AXLE STYLE: important when reusing old mounting hardware and also for proper tire clearance. Includes straight axles (round or square), drop axles with offset spindles, and torsion axles. Also consider spindle size when reusing existing hubs or drums.
-
AXLE CAMBER: Most trailer axles are designed with a bend in the tube that will deflect when the load (weight of the trailer) is applied. This will theoretically bring the trailer wheel camber toward a 0 value that is the best setting for most trailer applications. This will allow the tires to wear evenly and allow the longest tread life. Camber can be affected by damage to the axle. For example, if the axle spindle is bent, this will usually cause a negative camber on that side which will cause excess tread wear on the inside of that tire.
HangZhou CZPT Machinery Co., Ltd is a professional manufacturer of trailer parts in HangZhou, ZHangZhoug Province, China since 2016.
We can produce many trailer parts & accessories as follows: Towbars, axles, brake drums, hubs, brake disc, bearings, springs and springs and suspension kits, couplings, mudguards, U-Bolts, Jockey Wheels, keel rollers and brackets, wobble roller, wheel spacer, equalizers and all accessories related to trailers.
If you can send me the drawings or specifications of the trailer parts, mechanical parts and wheels, we can give you our price.
Q1: Do you have factory?
A: Yes, we have our own factory, own engineers, we can meet custom’s unique requirement.
Q2: Can I have a sample order?
A: Yes, welcome sample order to test and check quality. Mixed samples are acceptable.
Q3: It’s OK to print my logo on your product?
A: Yes, we can according to your exact requirement.
Q4:How do you ship the goods and how long does it take arrive?
A: We usually shipped by DHL, UPS, FedEx, it usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5: What is your advantages?
A: We are professional supplier for more than 10 years, we always put the quality and price at the first place. At the same time, our products are exported to various countries, we have full experience to solve thorny problems.
If you want to know about our products and us, welcome to enquiry and email me.thanks
1-Welcome OEM
- You can use your own brands or ours, if you use our brand, our professional team will help you design the packing.
2-Our service
- You inquiry related to our products or prices will be replied in 24 hours.
- Well-trained and experienced staffs to answer all your enquirys in fluent English.
- Protection of your sales area, ideas of your design and all your private information.
- We have a QC team, every product will be checked by them before packed.
3-Welcome to visit
- When you come to our company visit us, we will arrange a car for picking up and help you book hotel. If you want to visit the local scenic spot, our colleague will accompany you.
4-Warranty
- Customer should be provide the video and the pictures for the problem products.
- Products returned within the warranty period must bear product number & date code.
5-After service
- In production and after delivery, we will track on time and tell you goods situation.
- When the goods arrived, if you find any design and quality questions, or difference from your samples, please feel free to contact us, we will find the question and solve it with you.
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Condition: | New |
|---|---|
| Axle Number: | 2 |
| Application: | Trailer |
| Certification: | ASTM, CE, DIN, ISO |
| Material: | Steel |
| Type: | Front Axles |
| Samples: |
US$ 1/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
What are the considerations for off-road vehicles using beam axles?
Off-road vehicles that use beam axles have specific considerations to optimize performance and durability in challenging terrain. Here are the key factors to keep in mind when designing or using off-road vehicles with beam axles:
1. Ground Clearance:
Off-road vehicles require sufficient ground clearance to navigate over rocks, ruts, and uneven terrain. Beam axles, with their ability to provide good ground clearance, are a practical choice for these applications. Vehicle designers may also opt for suspension lifts to further increase ground clearance.
2. Wheel Articulation:
Off-roading often involves traversing uneven surfaces where individual wheel movement is essential to maintain traction and stability. Beam axles offer excellent wheel articulation, allowing each wheel to move independently and adapt to the terrain, keeping the tires in contact with the ground. This enhances the vehicle’s ability to overcome obstacles and maintain grip on challenging trails.
3. Durability and Impact Resistance:
Off-road environments can subject a vehicle to rough conditions and potential impacts from rocks, tree roots, and other obstacles. Beam axles are designed to be durable and resistant to damage. The choice of materials and construction should prioritize strength and impact resistance to ensure the axles can withstand the rigors of off-roading.
4. Suspension Tuning:
Off-road vehicles often require suspension tuning to achieve optimal performance. This includes selecting appropriate shock absorbers, springs, and other components to balance ride comfort and off-road capability. Tuning the suspension can improve handling, reduce body roll, and enhance overall off-road performance.
5. Differential Locking:
Off-road vehicles may benefit from differential locking mechanisms that ensure power is evenly distributed between the wheels on an axle. This helps prevent wheel spin and ensures that both wheels receive power for maximum traction. Locking differentials can be a valuable addition to vehicles with beam axles.
6. Tire Selection:
The choice of off-road tires is crucial. Tires with deep treads and appropriate tread patterns are essential for traction in mud, sand, and rocks. Tire pressure can also be adjusted to suit the terrain, and beadlock wheels can help secure the tires in challenging conditions.
7. Regular Maintenance:
Off-road vehicles with beam axles should undergo regular maintenance to ensure they remain in top condition. This includes inspecting and lubricating the axles, checking for signs of wear or damage, and addressing any issues promptly to prevent breakdowns during off-road adventures.
8. Customization:
Off-road enthusiasts often customize their vehicles with features like winches, skid plates, and roll cages to enhance off-road capabilities and safety. These modifications should be integrated with the beam axle suspension to ensure compatibility and functionality.
Summary:
Off-road vehicles using beam axles require careful consideration of ground clearance, wheel articulation, durability, and various other factors to optimize their performance in challenging terrains. Proper suspension tuning, tire selection, and maintenance are essential to ensure a safe and enjoyable off-roading experience.
How do beam axles contribute to the load-carrying capacity of vehicles?
Beam axles play a crucial role in enhancing the load-carrying capacity of vehicles, especially in heavy-duty and commercial applications. Their design and characteristics contribute to this capacity in several ways:
1. Weight Distribution:
Beam axles are known for their ability to evenly distribute the weight of the vehicle and its cargo. This even distribution of weight helps maintain stability and balance, preventing overloading of a specific wheel or axle. In heavy-duty trucks and buses, this balanced weight distribution is vital to ensure safe and efficient transportation of goods and passengers.
2. Load-Bearing Capacity:
Beam axles are engineered to handle heavy loads. Their robust construction and materials are chosen to withstand the stress and weight of cargo. This load-bearing capacity is critical for commercial vehicles that carry substantial payloads, such as delivery trucks, construction vehicles, and agricultural equipment.
3. Durability and Resistance:
Heavy-duty and commercial vehicles are exposed to challenging conditions and road surfaces. Beam axles are designed to be durable and resistant to damage from road impacts, rough terrain, and heavy loads. This durability ensures that the axles can maintain their load-carrying capability over time, reducing the need for frequent maintenance or repairs.
4. Support for Trailers:
Beam axles are commonly used in trailers and semi-trailers, where they provide support for the weight of the trailer and its cargo. This support is essential for maintaining stability and preventing issues like trailer sway. The load-bearing capacity of beam axles is instrumental in safely transporting goods and materials on the road.
5. Simplicity and Maintenance:
The straightforward design of beam axles simplifies maintenance and reduces downtime. This is particularly important in commercial applications where minimizing maintenance and maximizing uptime are priorities. The ease of maintenance helps ensure that the axles continue to contribute to the load-carrying capacity of the vehicle throughout their service life.
6. Customization:
In some cases, heavy-duty vehicles with beam axles can be customized to accommodate specific cargo and load requirements. This may involve adjusting the suspension components and optimizing the vehicle’s load-carrying capability based on the intended use.
Summary:
Beam axles are a fundamental component in enhancing the load-carrying capacity of vehicles, particularly in heavy-duty and commercial applications. Their ability to distribute weight evenly, handle heavy loads, resist damage, and simplify maintenance contributes to the overall efficiency and effectiveness of these vehicles in transporting goods, passengers, and cargo.
How does a solid beam axle work in the suspension of a vehicle?
A solid beam axle, also known as a live axle, is a type of suspension system commonly used in various vehicles. It operates differently from independent suspension systems, and its function can vary depending on whether it’s used as a rear axle or front axle in a vehicle:
Rear Solid Beam Axle:
In vehicles with rear solid beam axles, the following key characteristics define how they work in the suspension:
- Single Solid Axle: A solid beam axle is a single, rigid axle that spans the width of the vehicle. It connects both rear wheels and is a single, solid unit.
- Equal Wheel Movement: When one wheel on the axle encounters a bump or road imperfection, the other wheel on the same axle is affected. Both wheels move up and down together, and this movement is linked by the axle.
- Simple and Robust: Solid beam axles are known for their simplicity and robustness. They can handle heavy loads and provide durability, making them suitable for applications like trucks, SUVs, and some off-road vehicles.
Front Solid Beam Axle:
Front solid beam axles are less common in modern vehicles but are used in some specific applications. Their operation is as follows:
- Single Solid Axle: Like the rear version, the front solid beam axle is a single, solid axle spanning the width of the vehicle.
- Equal Wheel Movement: The front solid beam axle connects both front wheels. When one wheel encounters an obstacle, both front wheels move up and down together, as they are linked by the axle.
- Off-Road Performance: Front solid beam axles are often used in off-road and 4×4 vehicles because they provide excellent articulation and durability, making them suitable for rugged terrain.
The key aspect of solid beam axles is that they do not allow independent movement of the wheels on the same axle. This means that when one wheel encounters an obstacle, the other wheel is affected as well. While this setup can provide robustness and load-carrying capacity, it may result in a less comfortable ride and reduced traction on uneven surfaces compared to vehicles with independent suspension.
It’s important to note that the choice between solid beam axles and independent suspension depends on the vehicle’s intended use, design goals, and the trade-off between load-carrying capacity and ride quality.
editor by CX 2024-02-15